9.5ti MULTI-MOUNT PORTABLE The 9.5ti Multi-Mount packs 9500lbs of portable pulling capacity into a massive 12.5lb aluminum die-cast body. The new shape not only looks great, but sheds the elements like no other winch on the market: seals at the key points give extreme-duty water resistance. A Gen II Bosch motor delivers just the right balance between torque and speed. Plus another Warn Industries first - operator feedback - the thermometric indicator gives the operator information about motor temperature during the winching operation.

The 9.5ti Multi-Mount includes winch, ti remote, carrier, 7.5' power lead with quick connect plug for front of vehicle and hawse fairlead. Front receiver and rear power lead sold separately.

9.5ti MULTI-MOUNT SPECS/PART NUMBERS

Part Number: PN 65735, PN 67912 for the H2 Hummer

Rated Line Pull: 9500 lbs. (4310 kgs) single-line

Motor: Gen II, Series WoundTM

Remote Control for PN 65735: Remote switch, 12' (3.7m) lead

Remote Control for PN 67912: Remote switch, 12' (3.7m) lead, thermometric indicator, S2 elements, integrated flashlight

Geartrain: 3-Stage Planetary

Gear Ratio: 156:1

Lubrication: Aeroshell #17

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 112 lbs. (51 kgs.)

Wire Rope: 125', 5/16" diameter (30m, 8mm diam.)

Fairlead: Hawse

Recommended Battery: 650 CCA minimum for winching

Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug

Finish: Chromate with High-gloss Powder Coat

12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)	Line Speed FT./min(M/min.)	Motor Current	Pull by layer layer/Lbs(Kgs.)
0	62(18.9)	47 amps	1/9500(4313)
2000(910)	16.3(4.97)	160 amps	2/8650(3927)
4000(1810)	11.8(3.60)	230 amps	3/7920(3595)
6000(2720)	9.31(2.84)	305 amps	4/7400(3359)
8000(3630)	7.59(2.31)	370 amps	5/6940(3150)
9500(4310)	6.67(2.03)	425 amps

  Above performance specs are based on first layer of drum